Pressure Washing Challenges

High-pressure washing is an extremely effective method that industrial pressure washing in Detroit experts uses to remove all types of substances from different types of surfaces. It can be used to remove rubber, paint, sealants, soiling and chewing gums from roofs, walls, pavements, car parks, vehicles and so on. There are variables that can be used to adapt this cleaning method to suit different applications. These variables include water temperature and the pressure. There are however some challenges that industrial pressure washing in Detroit professionals faces while using high-pressure systems.

Graffiti removal

Graffiti removal is one of the biggest challenges. This is because of a wide range of surfaces on which graffiti appears today. It is a fairly simple process to remove graffiti from basic concrete walls that do not have inherent value. However, removing graffiti from soft stone, glass or monuments require very specific treatment so as to avoid damaging the surface. Hard cleaning methods like sandblasting have been replaced by soft cleaning methods where by industrial pressure washing in Detroit cleaners combine low aggressive powders and water to come up with a less abrasive effect, for example, Armex which is based on bicarbonate of soda. It is sufficient method to remove graffiti from vehicles, glass, and soft stone. It is also ecologically friendly, easier to dispose of and more soluble than other materials. There should be great care to flush the stone surface afterward so as to prevent salts penetration.

Restaurant hoods

Restaurant hoods are also a challenge to industrial pressure washing in Detroit companies due to difficulties in accessing the area to be cleaned and evacuating the water afterward. Restaurant hoods are often covered in fats and grease and need to be cleaned by hot water. The use of diesel fired heating systems is not allowed in the food industry, and this means that the restaurant cooker hoods have to be cleaned using cold water. Cleaners solve this challenge by using electrically heated pressure washers pr by feeding cold water machines with pre-heated water. You can as well use food industry detergents.

Solar panels

Solar panels are also very difficult to clean. Most solar panels suppliers do not recommend high-pressure washers for the application to avoid damaging its sensitive surfaces. Professionals solve this problem by using high-pressure washers in the lowest pressure mode and make use of more water and softer brushes to clean the dust and light dirt from the solar panels. The use of pure water is also recommended to avoid leaving behind stains.

Ducts and vents

Ducts and vents are also troublesome to clean. The main problem lies in how to access the hard to reach areas and clean them. The task is not difficult, but it is a question of cleaning away fats and greases and making use of a good detergent and hot water. The hard part is just accessing the area and cleaning them without having to interrupt the usual business taking place in the rooms. Gaining access to these areas will also mean interfering with other clean surfaces.